? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com c-6 e-mail: sales@glenair.com series 800 a b c d e f g h j k l m series 800 ?mighty mouse? original unf threaded coupling how to order sample part number 800-011 -01 m 6-4 p n series shell style shell material / finish shell size- insert arrangement contact type shell key position 800-010 receptacle with banding platform 800-011 receptacle with accessory thread -01 in-line -02 square flange for front or rear mounting -07 jam nut for rear panel mounting c aluminum / black anodize m aluminum / electroless nickel nf aluminum / cadmium with olive drab chromate zn aluminum / zinc- nickel with olive drab chromate znu aluminum / zinc-nickel with black chromate z1 stainless steel / passivated 5-3 3 #23 contacts 6-1 1 #16 contact 6-4 4 #23 contacts 6-7 7 #23 contacts 7-1 1 #12 contacts 7-10 10 #23 contacts 8-13 13 #23 contacts 9-4 4 #16 contacts 9-19 19 #23 contacts 10-26 26 #23 contacts 12-2 2 #12 contacts 12-37 37 #23 contacts #23 contacts are packaged with connectors. #16 and #12 contacts must be ordered separately. standard #23 contacts accept #22 through #28 awg wire. use the following contact codes to specify these contacts: p pin s socket special contacts for #26 to #30 awg are also available. use the following contact codes to specify these contacts: g pin h socket n normal x pos. x y pos. y z pos. z rev. 05-apr-2007 rear panel jam nut mount three shell options: jam nut with o-ring for rear panel mounting, square ange or in-line receptacle for free-hanging cables. series 800 receptacles C crimp termination square flange mount in-line integral band platform for direct attachment of a cable shield using a band-it? strap. install a boot, or overmold onto the band platform. an accessory thread is available for attaching strain reliefs and backshells.
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com c-7 e-mail: sales@glenair.com series 800 a b c d e f g h j k l m series 800 mighty mouse original unf threaded coupling b flats c flat ? a d thread e max ? f .460 (11.7) .125 (3.2) max panel thickness shell size 5 & 6 .100 (2.5) max panel thickness shell size 7 & up g g h max d thread j thread .460 (11.7) .125 (3.2) max panel thickness shell size 5 & 6 .100 (2.5) max panel thickness shell size 7 & up dimensions shell size ? a b c d threads mating e max. ? f ? g h max. j threads accessory in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. 5 .541 13.74 .500 12.70 .285 7.24 .3125-28 un-2a .875 22.22 .230 5.84 .051 1.30 .850 21.59 .250-32 unef-2a 6 .610 15.49 .562 14.27 .352 8.94 .3750-28 un-2a .875 22.22 .286 7.26 .051 1.30 .850 21.59 .3125-32 unef-2a 7 .670 17.02 .635 16.13 .411 10.44 .4375-28 unef-2a .875 22.22 .390 9.91 .093 2.36 .850 21.59 .4375-28 unef-2a 8 .775 19.69 .735 18.67 .473 12.01 .5000-32 un-2a .875 22.22 .445 11.30 .093 2.36 .850 21.59 .5000-28 unef-2a 9 .875 22.23 .806 20.47 .530 13.46 .5625-32 un-2a .875 22.22 .500 12.70 .093 2.36 .850 21.59 .5625-24 unef-2a 10 .980 24.89 .940 23.88 .604 15.34 .6250-32 un-2a .875 22.22 .565 14.35 .093 2.36 .850 21.59 .6250-24 unef-2a 12 1.062 26.97 .986 25.04 .712 18.08 .7500-28 un-2a .875 22.22 .650 16.51 .093 2.36 .850 21.59 .6875-24 unef-2a series 800 panel cutouts a flat ? b shell size a flat ?b in. mm. in. mm. 5 .297 / .292 7.54 / 7.42 .318 8.08 6 .365 / .360 9.27 / 9.14 .386 9.80 7 .429 / .424 10.90 / 10.77 .449 11.40 8 .483 12.27 .510 12.95 9 .540 13.72 .574 14.58 10 .614 15.60 .635 16.12 12 .722 18.38 .760 19.30 integral band platform 800-010-07 accessory thread 800-011-07 series 800 jam nut receptacles series 800 key positions plug receptacle key position key rotation normal (n) 150 x 140 y 130 z 120 shell size 5 and 6: master key is located at top dead center for normal (n) position. shell size 7 thru 12: master key is rotated 90 from tdc. z y x normal 60 60 z y x normal rev. 05-apr-2007
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com c-8 e-mail: sales@glenair.com series 800 a b c d e f g h j k l m series 800 mighty mouse original unf threaded coupling dimensions shell size a sq b ? c ? d e threads mating ? f g max. h threads accessory j max. in. .005 mm. 0.13 in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. 5 .527 13.39 .363 9.22 .680 17.27 .094 2.39 .3125-28 un-2a .230 5.84 .750 19.05 .250-32 unef-2a .725 18.42 6 .588 14.92 .423 10.74 .750 19.05 .094 2.39 .3750-28 un-2a .286 7.26 .750 19.05 .3125-32 unef-2a .725 18.42 7 .650 16.51 .483 12.27 .830 21.08 .130 3.30 .4375-28 unef-2a .390 9.91 .825 20.96 .4375-28 unef-2a .800 20.32 8 .710 18.03 .542 13.77 .938 23.83 .130 3.30 .5000-32 un-2a .445 11.30 .825 20.96 .5000-28 unef-2a .800 20.32 9 .938 23.83 .719 18.26 1.250 31.75 .130 3.30 .5625-32 un-2a .500 12.70 .825 20.96 .5625-24 unef-2a .800 20.32 10 .938 23.83 .719 18.26 1.250 31.75 .130 3.30 .6250-32 un-2a .565 14.35 .825 20.96 .6250-24 unef-2a .800 20.32 12 1.031 26.19 .812 20.62 1.375 34.93 .130 3.30 .7500-28 un-2a .650 16.51 .825 20.96 .6875-24 unef-2a .800 20.32 accessory thread 800-011-02 ? c a sq b bsc 4x ? d thru hole e thread ? f g max e thread j max .039 (.10) shell size 5 & 6 .050 (1.27) shell size 7 thru 12 .320 (8.1) shell size 5 & 6 .460 (11.7) shell size 7 thru 12 h thread integral band platform 800-010-02 series 800 square flange receptacles series 800 key positions key position key rotation plug key position receptacle key position normal (n) 150 x 140 y130 z 120 shell size 5 and 6: master key is located at top dead center for normal (n) position. shell size 7 thru 12: master key is rotated 90 from tdc. z y x normal 60 60 z y x normal rev. 05-apr-2007
? 2007 glenair, inc. cage code 06324 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com c-9 e-mail: sales@glenair.com series 800 a b c d e f g h j k l m series 800 mighty mouse original unf threaded coupling integral band platform 800-010-01 a flats ? b c thread ? e d max c thread f max g thread .039 (.10) shell size 5 & 6 .050 (1.27) shell size 7 thru 12 .320 (8.1) shell size 5 & 6 .460 (11.7) shell size 7 thru 12 accessory thread 800-011-01 dimensions shell size a? b c threads mating d max. ? e f max. g threads accessory in. mm. in. mm. in. mm. in. mm. in. mm. 5 .312 7.92 .355 9.02 .3125-28 un-2a .750 19.05 .230 5.84 .725 18.42 .250-32 unef-2a 6 .375 9.53 .400 10.16 .3750-28 un-2a .750 19.05 .286 7.26 .725 18.42 .3125-32 unef-2a 7 .445 11.30 .490 12.45 .4375-28 unef-2a .825 20.96 .390 9.91 .800 20.32 .4375-28 unef-2a 8 .550 13.97 .600 15.24 .5000-32 un-2a .825 20.96 .445 11.30 .800 20.32 .5000-28 unef-2a 9 .613 15.57 .663 16.84 .5625-32 un-2a .825 20.96 .500 12.70 .800 20.32 .5625-24 unef-2a 10 .675 17.15 .725 18.42 .6250-32 un-2a .825 20.96 .565 14.35 .800 20.32 .6250-24 unef-2a 12 .800 20.32 .850 21.59 .7500-28 un-2a .825 20.96 .650 16.51 .800 20.32 .6875-24 unef-2a series 800 key positions key position key rotation plug key position receptacle key position normal (n) 150 x 140 y130 z 120 shell size 5 and 6: master key is located at top dead center for normal (n) position. shell size 7 thru 12: master key is rotated 90 from tdc for normal position. series 800 in-line receptacles z y x normal 60 60 z y x normal rev. 05-apr-2007
|